5.
Soil data, where required.
6. Embedment depth.
**************************************************************************
PART 1
GENERAL
1.1
REFERENCES
**************************************************************************
NOTE: Issue (date) of references included in
project specifications need not be more current than
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
ACI INTERNATIONAL (ACI)
ACI 211.1
(1991; R 2002) Standard Practice for
Selecting Proportions for Normal,
Heavyweight, and Mass Concrete
ACI 212.3R
(1991: R 1999) Chemical Admixtures for
Concrete
ACI 214R
(2002) Evaluation of Strength Test Results
of Concrete
ACI 318M/318RM
(2002) Metric Building Code Requirements
for Structural Concrete and Commentary
ACI SP-66
(2004) ACI Detailing Manual
AMERICAN ASSOCIATION OF STATE HIGHWAY AND TRANSPORTATION OFFICIALS
(AASHTO)
AASHTO M 182
(1991; R 2000) Burlap Cloth Made from Jute
or Kenaf
AMERICAN WELDING SOCIETY (AWS)
AWS D1.4
(1998) Structural Welding Code -
Reinforcing Steel
ASTM INTERNATIONAL (ASTM)
ASTM A 153/A 153M
(2004) Zinc Coating (Hot-Dip) on Iron and
Steel Hardware
ASTM A 307
(2004) Carbon Steel Bolts and Studs, 60
000 PSI Tensile Strength
ASTM A 416/A 416M
(2002) Steel Strand, Uncoated Seven-Wire
SECTION 02395
Page 4
Previous Page
