1.2.5
Appendices
Provide information required below and information not specified in the
preceding paragraphs but pertinent to the maintenance or operation of the
product or equipment. Include the following:
1.2.6
Parts Identification
Provide identification and coverage for all parts of each component,
assembly, subassembly, and accessory of the end items subject to
replacement. Include special hardware requirements, such as requirement to
use high-strength bolts and nuts. Identify parts by make, model, serial
number, and source of supply to allow reordering without further
identification. Provide clear and legible illustrations, drawings, and
exploded views to enable easy identification of the items. When
illustrations omit the part numbers and description, both the illustrations
and separate listing shall show the index, reference, or key number that
will cross-reference the illustrated part to the listed part. Parts shown
in the listings shall be grouped by components, assemblies, and
subassemblies in accordance with the manufacturer's standard practice.
Parts data may cover more than one model or series of equipment,
components, assemblies, subassemblies, attachments, or accessories, such as
typically shown in a master parts catalog
1.2.6.1
Warranty Information
List and explain the various warranties and include the servicing and
technical precautions prescribed by the manufacturers or contract documents
in order to keep warranties in force. Include warranty information for
primary components such as the compressor of air conditioning system.
1.2.6.2
Personnel Training Requirements
Provide information available from the manufacturers that is needed for
use in training designated personnel to properly operate and maintain the
equipment and systems.
1.2.6.3
Testing Equipment and Special Tool Information
Include information on test equipment required to perform specified tests
and on special tools needed for the operation, maintenance, and repair of
components.
1.2.6.4
Contractor Information
Provide a list that includes the name, address, and telephone number of the
General Contractor and each Subcontractor who installed the product or
equipment, or system. For each item, also provide the name address and
telephone number of the manufacturer's representative and service
organization most convenient to the project site. Provide the name,
address, and telephone number of the product, equipment, and system
manufacturers.
1.3
SCHEDULE OF OPERATION AND MAINTENANCE DATA PACKAGES
**************************************************************************
NOTE: The type of O&M data needed for any product,
system, or piece of equipment depends upon the
SECTION 01781
Page 7
Previous Page
