three phases of control, perform submittal review, ensure testing is
performed, and prepare QC certifications and documentation required by this
Contract. The qualification requirements for the Assistant QC Manager
shall be [FILL IN BASED ON NATURE AND COMPLEXITY OF JOB]. The individual
must be familiar with the requirements of EM 385-1-1, and have experience
in the areas of hazard identification and safety compliance.]
[ Provide an assistant to the QC Manager at the work site to perform the
three phases of control, perform submittal review, ensure testing is
performed, and prepare QC certifications and documentation required by this
Contract. The Assistant QC Manager shall be on the work site during
supplemental work shifts [beyond the regular shift] and shall perform the
duties of the QC Manager during such supplemental shift work. The
qualification requirements for the Assistant QC Manager shall be [FILL IN
BASED ON NATURE AND COMPLEXITY OF JOB]. The individual must be familiar
with the requirements of EM 385-1-1, and have experience in the areas of
hazard identification and safety compliance.]
][1.5.5
QC Specialists Duties and Qualifications
**************************************************************************
NOTE: Only specify QC Specialists for those areas
of work of sufficient complexity or size where a
specialist is required to supplement the QC Manager.
The requirement for a QC Specialist must be
included in Part 3 of the technical section of the
specification were a QC Specialist is needed. The
use of Registered Professional Engineers or
Architects for QC Specialists may be allowed in
special cases, but only after consultation with and
approval by the Administering ROICC Office. Indicate
the specific time and frequency when the QC
Specialist must be on the site.
**************************************************************************
**************************************************************************
NOTE: Delete the words "QC Specialists" throughout
this section when this paragraph is not used.
**************************************************************************
Provide a separate QC Specialist at the work site for each of the areas of
responsibilities, specified in Part 3, Execution, of the technical
sections, who shall assist and report to the QC Manager and who [may
perform production related duties but must be allowed sufficient time to
perform][shall have no duties other than] their assigned quality control
duties. QC Specialists are required to attend the [Coordination and Mutual
Understanding Meeting, ]QC meetings and be physically present at the
construction site to perform the three phases of control and prepare
documentation for each definable feature of work in their area of
responsibility[ at the frequency specified below].
**************************************************************************
NOTE: The following are examples of QC Specialists
duties and qualifications:
Qualification/Experience
Area of
in Area of Responsibility
Responsibility
Roofing Manufacturer's
Installation and
Full time
SECTION 01450N
Page 11
Previous Page
