delete an existing "G" if the submittal item is not
complex and can be reviewed through the Contractor's
submittal is sufficiently important or complex in
context of the project.
For submittals requiring Government approval on Army
projects, a code of up to three characters within
the submittal tags may be used following the "G"
designation to indicate the approving authority.
Codes for Army projects using the Resident
Management System (RMS) are: "AE" for
Architect-Engineer; "DO" for District Office
(Engineering Division or other organization in the
District Office); "AO" for Area Office; "RO" for
Resident Office; and "PO" for Project Office. Codes
following the "G" typically are not used for Navy
projects.
Submittal items not designated with a "G" are
considered as being for information only for Army
projects and for Contractor Quality Control approval
for Navy projects.
**************************************************************************
The following shall be submitted in accordance with Section 01330 SUBMITTAL
PROCEDURES:
SD-01 Preconstruction Submittals
Construction Quality Control (QC) Plan;
G
**************************************************************************
NOTE: Coordinate the submittal requirement dates
with the submittal dates in sections entitled
Network Analysis Schedules.
**************************************************************************
Submit a Construction QC Plan prior to start of construction.
**************************************************************************
NOTE: Choose the following bracketed option for
projects requiring training of Government personnel.
Delete the following option for projects, which do
not require training.
**************************************************************************
[
SD-11 Closeout Submittals
Training Outline;
G
Training Video Recording
G
Validation of Training Completion;
G]
1.3
INFORMATION FOR THE CONTRACTING OFFICER
**************************************************************************
NOTE: When WebCM is not a requirement on the
SECTION 01450N
Page 5