**************************************************************************
USACE / NAVFAC / AFCESA
UFGS-01450N (August 2004)
----------------------
Preparing Activity: NAVFAC
Superseding
UFGS-01450N (November 2003)
UNIFIED FACILITIES GUIDE SPECIFICATIONS
References are in agreement with UMRL dated 23 June 2005
Revised throughout - changes not indicated by CHG tags
**************************************************************************
SECTION 01450N
CONSTRUCTION QUALITY CONTROL
08/04
**************************************************************************
NOTE: This guide specification covers the
preparation and use of Design-Bid-Build (DBB)
Quality Control. This guide specification will
normally be used for Category One and Category Two
projects. It may be also used for smaller, complex
projects at the discretion of the Government. This
section requires specific editing of the QC
requirements. This section, as edited, shall be
reviewed and approved by the Administering ROICC
Office prior to the 100 percent design submission.
Comments and suggestions on this guide specification
are welcome and should be directed to the technical
proponent of the specification. A listing of
technical proponents, including their organization
designation and telephone number, is on the Internet.
Recommended changes to a UFGS should be submitted as
a Criteria Change Request (CCR).
Use of electronic communication is encouraged.
Brackets are used in the text to indicate designer
choices or locations where text must be supplied by
the designer.
**************************************************************************
**************************************************************************
NOTE: When this specification is used, it will be in
conjunction with Section 01321N, Network Analysis
Schedule (NAS).
**************************************************************************
**************************************************************************
NOTE: Two options for the QC Manager duties have
been incorporated into this guide specification.
The first option allows the QC Manager to perform
production related duties and the second option does
SECTION 01450N
Page 3