context of the project.
For submittals requiring Government approval on Army
projects, a code of up to three characters within
the submittal tags may be used following the "G"
designation to indicate the approving authority.
Recommended codes for Army projects are "RE" for
Resident Engineer approval, "ED" for Engineering
approval, and "AE" for Architect-Engineer approval.
Codes following the "G" typically are not used for
Navy projects.
Submittal items not designated with a "G" are
considered as being for information only for Army
projects and for Contractor Quality Control approval
for Navy projects.
**************************************************************************
Government approval is required for submittals with a "G" designation;
submittals not having a "G" designation are for information only or as
otherwise designated. When used, a designation following the "G"
designation identifies the office that will review the submittal for the
Government. The following shall be submitted in accordance with Section
01330 SUBMITTAL PROCEDURES:
SD-01 Preconstruction Submittals
Qualifications; G
Standard Activity ID Dictionary; G
[Design Network Analysis Schedule; G]
Construction Network Analysis Schedule; G
Baseline Network Analysis Schedule; G
SD-07 Certificates
Monthly Network Analysis Updates; G
[Summary Network; G]
SD-11 Closeout Submittals
As-Built Schedule; G
1.3
SCHEDULE ACCEPTANCE
Review comments made by the Government on the Contractor's schedule(s) will
not relieve the Contractor from compliance with requirements of the
Contract Documents. The Contractor is responsible for scheduling,
sequencing, and prosecuting the Work to comply with the requirements of the
Contract Documents. Government acceptance extends only to the activities
of the Contractor's schedule that the Government has been assigned
responsibility and agrees it is responsible. The Government will also
review for contract imposed schedule constraints and conformance, and cost
loading of the CPM activities. Comments offered on other parts of the
schedule, which the Contractor is assigned responsibility, are offered as a
SECTION 01321N
Page 5
Previous Page
