Cable Television Premises Distribution System[; G][; G, [_____]]
Detail drawings including a complete list of equipment and
material. Detail drawings shall contain complete wiring and
schematic diagrams and other details required to demonstrate that
the system has been coordinated and will function properly as a
system. Drawings shall include vertical riser diagrams, equipment
rack and panel details, elevation drawings of telecommunications
closet walls, outlet face plate details for each outlet
configuration, and descriptions and types of cables, conduits, and
cable trays, if used. Drawings shall show proposed layout and
anchorage of equipment and appurtenances, and equipment
relationship to other parts of the work including clearance for
maintenance and operation.
Installation[; G][; G, [_____]]
Record drawings for the installed cable system. The drawings
shall show the locations of cable terminations, including outlets,
and location and routing of cables. The identifier for each
termination and cable shall appear on the drawings.
SD-03 Product Data
Spare Parts.
Lists of spare parts, tools, and test equipment, as specified.
Manufacturer's Recommendations[; G][; G, [_____]]
Where installation procedures, or any part thereof, are required
to be in accordance with the recommendations of the manufacturer
of the material being installed, printed copies of these
recommendations shall be provided prior to installation.
Installation of the item will not be allowed to proceed until the
recommendations are received and approved.
Test Plan[; G][; G, [_____]]
Test plan defining the tests required to ensure that the system
meets technical, operational and performance specifications, [60]
[_____] days prior to the proposed test date. The test plan must
be approved before testing begins. The test plan shall identify
the capabilities and functions to be tested, and include detailed
instructions for the setup and execution of each test and
procedures for evaluation and documentation of the results.
Qualifications[; G][; G, [_____]]
Proof of the qualifications of the Contractor, Installers, and
Manufacturers that will perform the work, and provide the
specified products.
SD-06 Test Reports
Testing
Test reports in booklet form with witness signatures verifying
execution of tests shall be provided. The cable system testing
SECTION 16815A
Page 5
Previous Page
