1.3.6
Spare Parts
The Contractor shall submit spare parts data for each different item of
material and equipment specified, after approval of the detail drawings and
not later than [_____] months prior to the date of beneficial occupancy.
The data shall include a suggested list of spare parts and supplies, with
current unit prices and source of supply.
1.4
SYSTEM DESCRIPTION
**************************************************************************
NOTE: This guide specification is to be used to
specify reception and subsequent distribution of
off-the-air television and FM radio broadcast
signals. If there is a specific requirement at the
project site (if defined in the Architect-Engineer's
Statement of Work) for direct broadcast satellite
(DBS) reception for multiple users, the designer
will apply current state-of-the-art design
information available from manufacturers of this
equipment to configure a cabling and equipment
arrangement to provide the required operation and
service distribution. Product-specific requirements
should be validated during the system testing, which
should be done in accordance with the requirements
herein, modified as necessary to ensure a fully
functional installation.
**************************************************************************
The television signal reception system shall receive radio frequency (RF)
signals available from [FM radio transmitters] [and] [television broadcast
transmitters] for transmission to end users via a coaxial cable
distribution system. The system shall utilize industry standard,
commercially available antenna systems and solid-state electronic passive
and active devices to receive and distribute the RF signals to each end
user and meet the specifications and requirements listed herein. The
system shall comply with 47 CFR 15, 47 CFR 25, and 47 CFR 76. The
equipment used shall be designed for commercial and industrial
applications. The system shall be designed to provide continuous
entertainment on a series of VHF and non-broadcast channels selectable by
the users. UHF channels received shall be translated to a vacant VHF or
non-broadcast channel before distribution over the single cable
distribution system.
1.4.1
System Configuration
The system shall consist of [log-periodic or yagi antenna for off-air
signal reception,] and [passive] [and] [active] cable distribution
equipment and head end equipment.
1.4.1.1
Head End Equipment
The head end equipment shall serve as an interface between the receiving
antennas and the premises distribution system to allow for signal reception
[processing,] [and] [modulation,] [and] [translation to vacant channels,]
[and] [combining signals for single cable distribution,] [and]
[amplification,] [and] [equalization].
SECTION 16785A
Page 7
Previous Page
