basic designation only.
ELECTRONIC INDUSTRIES ALLIANCE (EIA)
EIA ANSI/TIA/EIA-222-F
(1996) Structural Standards for Steel
Antenna Towers and Antenna Supporting
Structures
INSTITUTE OF ELECTRICAL AND ELECTRONICS ENGINEERS (IEEE)
IEEE C2
(2002) National Electrical Safety Code
NATIONAL CABLE AND TELECOMMUNICATIONS ASSOCIATION (NCTA)
NCTA RP
(2003) NCTA Recommended Practices for
Measurements on Cable Television Systems
NATIONAL FIRE PROTECTION ASSOCIATION (NFPA)
NFPA 70
(2005) National Electrical Code
NFPA 780
(2000) Installation of Lightning
Protection Systems
U.S. FEDERAL AVIATION ADMINISTRATION (FAA)
FAA AC 70/7460-1
(Rev K; Change 1) Obstruction Marking and
Lighting
U.S. NATIONAL ARCHIVES AND RECORDS ADMINISTRATION (NARA)
47 CFR 15
Radio Frequency Devices
47 CFR 17
Construction, Marking, and Lighting of
Antenna Structures
47 CFR 25
Satellite Communications
47 CFR 76
Multichannel Video and Cable Television
Service
UNDERWRITERS LABORATORIES (UL)
UL 467
(2004) Grounding and Bonding Equipment
1.2
SUBMITTALS
**************************************************************************
NOTE: Submittals must be limited to those necessary
for adequate quality control. The importance of an
item in the project should be one of the primary
factors in determining if a submittal for the item
should be required.
A "G" following a submittal item indicates that the
submittal requires Government approval. Some
submittals are already marked with a "G". Only
delete an existing "G" if the submittal item is not
complex and can be reviewed through the Contractor's
SECTION 16785A
Page 4
Previous Page
