a. Before the system is turned over to the Government for operational use,
training shall be provided for [_____] maintenance technicians designated
by the Contracting Officer.
b. The onsite technician training course shall provide the number of
instructional hours necessary to cover all aspects of system setup,
programming, operations, preventive maintenance, routine maintenance,
routine repair, and troubleshooting procedures for the system as installed.
c. Immediately after the phased installation of each part of the system
the technician staff shall be given additional classroom and field
instructions as required to advance their training up the latest overall
configuration.
d. Eleven months after the system is installed and accepted by the
Contracting Officer, the technician staff shall be given a comprehensive
refresher course covering the final configuration for the system. This
refresher course shall include at least [_____] hour(s) of instruction.
e. Technician training shall be provided for [_____] technicians at the
Manufacturer=s factory at no additional cost to the Government. Training
shall include comprehensive instruction for complete setup, operation,
maintenance and repair of the system, including the theory of operation,
software installation and setup, maintenance programs, failure diagnostic
programs, troubleshooting and repair. The hours of instruction shall be as
required by the Manufacturer for complete and comprehensive training and
certification.
3.7
PROTECTION
Items that can be easily stolen, such as desktop computer and monitor
equipment, shall not be permanently installed until such time as the system
Contractor has been notified by the Contracting Officer that the facility
is secured.
3.8
SCHEDULES
3.8.1
NCAV System
a. Provide a complete and operational NCAV System as specified in this
Section and indicated on the telecommunications systems drawings.
b. Deliver and install all product items as required to comply with the
approved installation schedule.
3.8.2
Indicated Items
Provide the quantity and type of system components, such as stations,
lights, and outlets, as indicated on the project drawings.
3.8.3
Main Terminal/Equipment Panels
The telecommunication drawings indicate space in telecommunications rooms
that has been designated for the installation of system main
terminal/equipment panels. As required by the system application design,
furnish and install the type and quantity of main terminal/equipment
panel(s) in these designated locations.
SECTION 16731A
Page 62
Previous Page
