used in the preparation of project construction
specifications.
**************************************************************************
PART 1
GENERAL
1.1
REFERENCES
**************************************************************************
NOTE: Issue (date) of references included in
project specifications need not be more current than
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
ELECTRONIC INDUSTRIES ALLIANCE (EIA)
EIA EIA/TIA-455-59
(1989) Measurement of Fiber Point Defects
Using an OTDR
EIA EIA/TIA-455-78A
(1990; R 1998) Spectral-Attenuation
Cutback Measurement for Single-Mode
Optical Fibers
EIA TIA-758
(1999) Customer-owned Outside Plant
Telecommunications Cabling Standard,
including Addendum No. 1
EIA TIA/EIA-455-107A
(1999) Component Reflectance or
Link/System Return Loss using a Loss Test
Set
EIA TIA/EIA-455-B
(1998) Test Procedures for Fiber Optic
Fibers, Cables, Transducers, Sensors,
Connecting and Terminating Devices, and
other Fiber Optic Components (ANSI)
EIA TIA/EIA-472D000-A
(1993) Fiber Optic Communications Cable
for Outside Plant Use
EIA TIA/EIA-472DAAA
(1993) Detail Specification for All
Dielectric Fiber Optic Communications
Cable for Outside Plant Use Containing
Class 1a 62.5 Um Core Diameter/125 um
Cladding Diameter/250 um Coating Diameter
Fiber(s).
EIA TIA/EIA-4750000-C
(1996) Generic Specifications for Fiber
Optic Connectors (ANSI)
EIA TIA/EIA-526-14A
(1998) OFSTP-14A Optical Power Loss
Measurements of Installed Multimode Fiber
Cable Plant (ANSI/TIA/EIA-526-14A)
SECTION 16713N
Page 4
Previous Page
