engine-generator set. Testing shall be in accordance with an EPA approved
method, 40 CFR 60, (Appendix, Method 7, 7A, 7B, 7C, 7D or 7E). Emissions
at rated full load shall be within the limits specified in the paragraph
entitled "Diesel Engine Emissions Limits."
]3.6
DEMONSTRATION
Upon completion of the work and at a time approved by the Contracting
Officer, the Contractor shall provide instructions by a qualified
instructor to the Government personnel in the proper operation and
maintenance of the equipment. [_____] Government personnel shall receive
training comparable to the equipment manufacturer's factory training. The
duration of instruction shall be for not less than one 8 hour working day
for instruction of operating personnel and not less than one 8 hour working
day for instruction of maintenance personnel.
3.6.1
Instructor's Qualification Resume
Instructors shall be regular employees of the engine-generator set
manufacturer. The instruction personnel provided to satisfy the
requirements above shall be factory certified by the related equipment
manufacturer to provide instruction services. Submit the name and
qualification resume of instructor to the Contracting Officer for approval.
3.6.2
Training Plan
Submit training plan 30 calendar days prior to training sessions. Training
plan shall include scheduling, content, outline, and training material
(handouts). Content shall include but not limited to the following:
3.6.2.1
Operating Personnel Training
This instruction includes operating the engine-generator set, auxiliary
equipment including automatic transfer switches in all modes, and the use
of all functions and features specified.
3.6.2.2
Maintenance Personnel Training
Shall include mechanical, hydraulic, electrical, and electronic
instructions for the engine-generator set and auxiliary equipment including
automatic transfer switches.
a.
Mechanical Training:
Shall include at least the following:
1.
A review of mechanical diagrams and drawings.
2.
Component location and functions.
3.
Troubleshooting procedures and techniques.
4.
5.
Assembly/disassembly procedures.
6.
Adjustments (how, when, and where).
7.
8.
Review of flow diagram.
SECTION 16237N
Page 46
Previous Page
