Functional Performance Test Checklist - Energy Recovery System
For Energy Recovery System:
[_____]
1. Functional Performance Test: Contractor shall demonstrate operation of
energy recovery system as per specifications including the following: Start
equipment to provide energy source for recovery system.
a.
Verify energy source is providing recoverable energy.
____________
b.
Verify recovery system senses available energy and activates.
____
c. Verify that recovery system deactivates when recoverable energy is
no longer available.
__________________________________________________
2. Verify recovery system inlet/outlet readings, compare to design
conditions and manufacturer's performance data.
Design
Actual
Primary loop inlet temp (degrees C)
__________
__________
Primary loop outlet temp (degrees F)
__________
__________
Primary loop flow rate
__________
__________
Secondary loop inlet temp (degrees)
__________
__________
Secondary loop outlet temp (degrees C)
__________
__________
Energy recovered (kJ)
__________
__________
Design
Actual
Primary loop inlet temp (degrees F)
__________
__________
Primary loop outlet temp (degrees F)
__________
__________
Primary loop flow rate
__________
__________
Secondary loop inlet temp (degrees F)
__________
__________
Secondary loop outlet temp (degrees F)
__________
__________
Energy recovered BTU's)
__________
__________
3.
Check and report unusual vibration, noise, etc.
___________________________________________________________________________
___________________________________________________________________________
4. Certification: We the undersigned have witnessed the above functional
performance tests and certify that the item tested has met the performance
requirements in this section of the specifications.
Signature and Date
Contractor's Chief Quality Control Representative__________________________
Contractor's Mechanical Representative
___________________________
Contractor's Electrical Representative
___________________________
Contractor's Testing , Adjusting and Balancing Representative
___________________________
Contractor's Controls Representative
___________________________
SECTION 15995A
Page 65
Previous Page
