**************************************************************************
USACE / NAVFAC / AFCESA
UFGS-15951N (September 1999)
------------------------------
Preparing Activity: NAVFAC
Replacing without revision
NFGS of same number and date
UNIFIED FACILITIES GUIDE SPECIFICATIONS
References are in agreement with UMRL dated 23 June 2005
**************************************************************************
SECTION 15951N
TESTING INDUSTRIAL VENTILATION SYSTEMS
09/99
**************************************************************************
NOTE: This guide specification covers the
requirements for air flow testing of industrial
ventilation systems.
Comments and suggestions on this guide specification
are welcome and should be directed to the technical
proponent of the specification. A listing of
technical proponents, including their organization
designation and telephone number, is on the Internet.
Recommended changes to a UFGS should be submitted as
a Criteria Change Request (CCR).
Use of electronic communication is encouraged.
Brackets are used in the text to indicate designer
choices or locations where text must be supplied by
the designer.
**************************************************************************
**************************************************************************
NOTE: An industrial ventilation system is the
mechanical equipment that provides the simultaneous
exhaust and replacement of air to control
contaminants generated from industrial operations.
Test the following industrial ventilation system
applications according to this specification:
1. Systems installed to control employee exposure
to:
a. Hazardous airborne materials with a Permissible
Exposure Limit (PEL) or Threshold Limit Value (TLV)
of 0.1 milligram per cubic meter or the equivalent
value in parts per million.
b.
Isocyanate paints.
c.
Lead.
d.
Beryllium.
SECTION 15951N
Page 3
Previous Page
