fittings.
**************************************************************************
PART 1
GENERAL
1.1
REFERENCES
**************************************************************************
NOTE: Issue (date) of references included in
project specifications need not be more current than
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
AIR MOVEMENT AND CONTROL ASSOCIATION INTERNATIONAL(AMCA)
AMCA 203
(1990) Field Performance Measurements of
Fan Systems
AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)
ANSI S1.11
(1986; R 1998) Octave- Band and
Fractional-Octave-Band Analog and Digital
Filters (ASA 65)
ANSI S1.4
(1983; R 2001) Sound Level Meters (ASA 47)
AMERICAN SOCIETY OF HEATING, REFRIGERATING AND AIR-CONDITIONING
ENGINEERS (ASHRAE)
ASHRAE HA
(2003) HVAC Applications Handbook
ASSOCIATED AIR BALANCE COUNCIL (AABC)
AABC MN-1
(2002) National Standards for Total System
Balance
AABC MN-4
(1996) Test and Balance Procedures
NATIONAL ENVIRONMENTAL BALANCING BUREAU (NEBB)
NEBB MASV
(1994) Procedural Standards for
Measurements and Assessment of Sound and
Vibration
NEBB TABES
(2005) Procedural Standards for Testing,
Adjusting, Balancing of Environmental
Systems
SHEET METAL AND AIR CONDITIONING CONTRACTORS' NATIONAL ASSOCIATION
(SMACNA)
SMACNA HVACTAB
(2002, 3rd Ed) HVAC Systems - Testing,
SECTION 15950N
Page 5
Previous Page
