e.
Minimum system pressure drop, Pa inches WC (from inlet flange to
outlet flange) [_____]
f.
Maximum system pressure drop, Pa inches WC (from inlet flange to
outlet flange) [_____]
g.
Minimum individual hopper storage capacity, hours [_____]
h.
Minimum individual hopper storage capacity, cu m cu ft[_____]
i.
Minimum hopper valley angle, degrees from horizontal ___55___
j.
Maximum negative pressure, Pa inches WC [_____]
k.
Maximum snow load, kg/m2 psf [_____]
l.
Maximum wind load, kg/m2 psf [_____]
m.
Maximum live load, kg/m2 psf [_____]
[1.5.7
Bags--Reverse Air Cleaning System
**************************************************************************
NOTE: Select this paragraph or the following
paragraph entitled "Bags--Pulse Jet Cleaning System."
**************************************************************************
a.
Maximum bag diameter, 305 mm 12 inches
b.
Maximum bag length, 10.70 m 35 feet
c.
Minimum tensile strength (warp direction), kPa psi [_____]
d.
Minimum tensile strength (fill direction), kPa psi [_____]
e.
Minimum yarn weight, g per sq m oz per sq yd [_____]
f.
Minimum permeability, L/s per sq m cfm per sq ft (clean at
125 Pa
1/2 inch WC) [_____]
g.
Minimum thickness, mm mil [_____]
h.
Minimum M.I.T. flex (warp direction), cycles [_____]
i.
Minimum M.I.T. flex (fill direction), cycles [_____]
j.
Minimum count, ends per 25 mm inch by picks per 25 mm inch [_____]
k.
Minimum fabric weight, 2894 g per sq m 9.5 oz per sq ft
l.
Minimum bursting strength, kPa psi [_____]
][1.5.8
Bags--Pulse Jet Cleaning System
a.
Maximum bag diameter, 152 mm 6 inches
b.
Maximum bag length, 4.25 m 14 feet
SECTION 15863N
Page 19
Previous Page
