Port Hueneme, CA 93043-4340
Telephone: (805) 982-4984
Indicate on drawings who supplies compressed air
cleaning and control system components, piping,
valves, and fittings.
**************************************************************************
PART 1
GENERAL
1.1
REFERENCES
**************************************************************************
NOTE: Issue (date) of references included in
project specifications need not be more current than
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
AIR MOVEMENT AND CONTROL ASSOCIATION INTERNATIONAL(AMCA)
AMCA 201
(2002) Fans and Systems
AMCA 210
(1999) Laboratory Methods of Testing Fans
for Aerodynamic Performance Rating
AMCA 500-D
(1998) Laboratory Methods of Testing
Dampers for Rating
AMCA 801
(2001) Industrial Process/Power Generation
Fans: Specification Guidelines
AMCA 802
(2002) Industrial Process/Power Generation
Fans: Establishing Performance Using
Laboratory Models
AMCA 99
(1999; R 2003) Standards Handbook
ASTM INTERNATIONAL (ASTM)
ASTM A 108
(2003) Steel Bars, Carbon, Cold-Finished
ASTM A 123
(1989a) Zinc (Hot Dip Galvanized) Coatings
on Iron and Steel Products
ASTM A 167
(2004) Stainless and Heat-Resisting
Chromium-Nickel Steel Plate, Sheet, and
Strip
ASTM A 242/A 242M
(2004) High-Strength Low-Alloy Structural
Steel
ASTM A 36/A 36M
(2004) Carbon Structural Steel
SECTION 15863N
Page 5
Previous Page
