NATIONAL FIRE PROTECTION ASSOCIATION (NFPA)
NFPA 211
(2003) Chimneys, Fireplaces, Vents, and
Solid Fuel-Burning Appliances
NFPA 54
(2002) National Fuel Gas Code
NFPA 70
(2005) National Electrical Code
NFPA 90A
(2002) Installation of Air Conditioning
and Ventilating Systems
NFPA 90B
(2002) Installation of Warm Air Heating
and Air Conditioning Systems
NFPA 91
(1999) Exhaust Systems for Air Conveying
of Vapors, Gases, Mists and Noncombustible
Particulate Solids
UNDERWRITERS LABORATORIES (UL)
UL 441
(1996; Rev thru Dec 1999) Gas Vents
UL 731
(1995; Rev thru Jan 1999) Oil-Fired Unit
Heaters
1.2
RELATED REQUIREMENTS
Section 15050N BASIC MECHANICAL MATERIALS AND METHODS, applies to this
section with additions and modifications specified herein.
1.3
SUBMITTALS
**************************************************************************
NOTE: Submittals must be limited to those necessary
for adequate quality control. The importance of an
item in the project should be one of the primary
factors in determining if a submittal for the item
should be required.
A "G" following a submittal item indicates that the
submittal requires Government approval. Some
submittals are already marked with a "G". Only
delete an existing "G" if the submittal item is not
complex and can be reviewed through the Contractor's
Quality Control system. Only add a "G" if the
submittal is sufficiently important or complex in
context of the project.
For submittals requiring Government approval on Army
projects, a code of up to three characters within
the submittal tags may be used following the "G"
designation to indicate the approving authority.
Codes for Army projects using the Resident
Management System (RMS) are: "AE" for
Architect-Engineer; "DO" for District Office
(Engineering Division or other organization in the
District Office); "AO" for Area Office; "RO" for
Resident Office; and "PO" for Project Office. Codes
SECTION 15760N
Page 5
Previous Page
