"G" designation identifies the office that will review the submittal for
the Government.] The following shall be submitted in accordance with
Section 01330 SUBMITTAL PROCEDURES:
SD-02 Shop Drawings
Ground heat exchanger piping system as-Built drawings; G
SD-03 Product Data
**************************************************************************
NOTE: Include the integral or appurtenant space
temperature controls (STC) following when Section
15901, "Space Temperature Control Systems" or
Section 15910, "Direct Digital Control Systems" is
not included in the project design specifications.
**************************************************************************
Product data for integral or appurtenant space temperature
controls (STC) supplied with the listed equipment shall include
shall include point-to-point electrical wiring diagrams for each
STC.
Water-source water-to-air heat pumps; G
[including STC data]
Water-source water-to-water heat pumps; G
[including STC data]
[
Ground heat exchanger piping system; G]
[
Closed circuit coolers; G]
[
Plate heat exchangers; G]
Valves
Specialty valves; G
Air separators
[
Heat tape]
[
Antifreeze; G]
SD-06 Test Reports
Piping welds NDE report
[
Water-source water-to-air heat pumps - field acceptance test plan;
G]
[
Water-source water-to-water heat pumps - field acceptance test plan;
G]
[
Closed Circuit Coolers - field acceptance test plan; G]
SECTION 15741N
Page 10
Previous Page
