PART 1
GENERAL
1.1
REFERENCES
**************************************************************************
NOTE: Issue (date) of references included in
project specifications need not be more current than
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
AIR-CONDITIONING AND REFRIGERATION INSTITUTE (ARI)
ARI 410
(2001; Addendum 2002) Forced-Circulation
Air-Cooling and Air-Heating Coils
AMERICAN SOCIETY OF HEATING, REFRIGERATING AND AIR-CONDITIONING
ENGINEERS (ASHRAE)
ASHRAE 15
(2001; Errata 2002) Safety Standard for
Refrigeration Systems
ASHRAE 52.1
(1992) Gravimetric and Dust-Spot
Procedures for Testing Air-Cleaning
Devices Used in General Ventilation for
Removing Particulate Matter
ASME INTERNATIONAL (ASME)
ASME B16.22
(2002) Wrought Copper and Copper Alloy
Solder Joint Pressure Fittings
ASME B16.26
(1988) Cast Copper Alloy Fittings for
Flared Copper Tubes
ASME B31.1
(2004) Power Piping
ASME B31.5
(2001) Refrigeration Piping and Heat
Transfer Components
ASME BPVC SEC
(1998) Boiler and Pressure Vessel Codes
ASTM INTERNATIONAL (ASTM)
ASTM B 280
(2003) Seamless Copper Tube for Air
Conditioning and Refrigeration Field
Service
ETL TESTING LABORATORIES (ETL)
ETL DLP
(updated continuously) Directory of ETL
Listed Products
SECTION 15702N
Page 4
Previous Page
