Framed Instructions
Proposed diagrams, instructions, and other sheets, before
Welding
A copy of qualified procedures and a list of names and
identification symbols of qualified welders and welding operators.
A proposed performance test procedure, 30 days prior to the
proposed test date, containing a complete description of the
proposed test along with calibration curves or test results
furnished by an independent testing laboratory of each instrument,
meter, gauge, and thermometer to be used in the tests. The test
shall not commence until the procedure has been approved. The
Contractor's complete plan for water treatment, including proposed
chemicals to be used and nationally recognized testing codes
applicable to the system, prior to system startup.
SD-06 Test Reports
Tests
Test reports in booklet form showing all field tests performed
to adjust each component and all field tests performed to prove
compliance with the specified performance criteria, upon
completion and testing of the installed system. Each test report
shall indicate the final position of controls. A written
statement from the manufacturer's representative certifying that
combustion control equipment has been properly installed and is in
proper operating condition, upon completion of the installation.
The action settings for all automatic controls in the form of a
typed, tabulated list indicating the type of control, location,
setting, and function.
SD-10 Operation and Maintenance Data
Steam-Generating Units
Operating instructions, prior to the training course. [Six]
[_____] complete copies of operating instructions outlining the
step-by-step procedures required for system startup, operation,
and shutdown. The instructions shall include the manufacturer's
name, model number, service manual, parts list, and brief
description of all equipment and their basic operating features.
Maintenance instructions, prior to the training course. [Six]
[_____] complete copies of maintenance instructions listing
routine maintenance procedures, possible breakdowns and repairs,
and troubleshooting guides. The instructions shall include piping
layout, equipment layout, and simplified wiring, and control
diagrams of the system as installed.
1.3
GENERAL REQUIREMENTS
1.3.1
Standard Products
Material and equipment shall be the standard products of a manufacturer
regularly engaged in the manufacture of the products and shall essentially
SECTION 15559A
Page 15
Previous Page
