context of the project.
For submittals requiring Government approval on Army
projects, a code of up to three characters within
the submittal tags may be used following the "G"
designation to indicate the approving authority.
Codes for Army projects using the Resident
Management System (RMS) are: "AE" for
Architect-Engineer; "DO" for District Office
(Engineering Division or other organization in the
District Office); "AO" for Area Office; "RO" for
Resident Office; and "PO" for Project Office. Codes
following the "G" typically are not used for Navy
projects.
Submittal items not designated with a "G" are
considered as being for information only for Army
projects and for Contractor Quality Control approval
for Navy projects.
**************************************************************************
Government approval is required for submittals with a "G" designation;
submittals not having a "G" designation are for [Contractor Quality Control
approval.] [information only. When used, a designation following the "G"
designation identifies the office that will review the submittal for the
Government.] The following shall be submitted in accordance with Section
01330 SUBMITTAL PROCEDURES:
SD-02 Shop Drawings
Steam-Generating Units[; G][; G, [_____]]
Equipment Erection[; G][; G, [_____]]
Detail drawings, consisting of schedules, performance charts,
brochures, diagrams, drawings, and instructions necessary for
installation of the steam-generating units and associated
equipment. Drawings for piping, pipe anchors, wiring devices,
trenches and related foundations, and setting plans certified by
the boiler manufacturer and burner manufacturer including coal and
ash handling equipment shall be included. Drawings shall indicate
clearances required for maintenance and operation and shall also
contain complete wiring and schematic diagrams, equipment layout
and anchorage, and any other details required to demonstrate that
the system has been coordinated and will properly function as a
unit. Manufacturer's written instructions indicating optimum
pressures at all manometer connectors shall be included.
SD-03 Product Data
Steam-Generating Units
Manufacturer's design data and structural computations for
walls, roof, foundations, and other features, for specialty type
of construction. Design data for lateral forces that may be
encountered due to wind loads and seismic forces shall be included.
Spare Parts
Spare parts data for each item of equipment specifed.
SECTION 15559A
Page 14
Previous Page
