3. Quantities, location and capacity of equipment.
**************************************************************************
PART 1
GENERAL
1.1
REFERENCES
**************************************************************************
NOTE: Issue (date) of references included in
project specifications need not be more current than
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
AMERICAN INSTITUTE OF STEEL CONSTRUCTION (AISC)
AISC 335
(1989) Structural Steel Buildings
Allowable Stress Design and Plastic Design
AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)
ANSI S1.4
(1983; R 2001) Sound Level Meters (ASA 47)
AMERICAN WELDING SOCIETY (AWS)
AWS D1.1/D1.1M
(2004) Structural Welding Code - Steel
AWS Z49.1
(1999) Safety in Welding, Cutting and
Allied Processes
ASME INTERNATIONAL (ASME)
ASME B40.1
(1991) Gauges - Pressure Indicating Dial
Type - Elastic Element
ASME BPVC SEC I
(2001) Boiler and Pressure Vessel Code;
Section I, Power Boilers
ASME BPVC SEC VIII
(2001) Boiler and Pressure Vessel Codes:
Section VIII Rules for Construction of
Pressure Vessels, Division 1
ASME BPVC SEC VIII D1
(2001) Boiler and Pressure Vessel Code;
Section VIII, Pressure Vessels Division 1
- Basic Coverage
ASME CSD-1
(2002) Control and Safety Devices for
Automatically Fired Boilers
ASME PTC 4.1
(1964; Addenda: 1968, 1969; R 1991) Steam
Generating Units
SECTION 15516N
Page 4
Previous Page
