or text of the project specifications must specify,
the tensile strength, elongation, shear strength,
size, length, type, and location of the welds, as
necessary.
**************************************************************************
PART 1
GENERAL
1.1
REFERENCES
**************************************************************************
NOTE: Issue (date) of references included in
project specifications need not be more current than
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
AMERICAN PETROLEUM INSTITUTE (API)
API Std 1104
(1999; E 2001) Welding of Pipeline and
Related Facilities
AMERICAN SOCIETY FOR NONDESTRUCTIVE TESTING (ASNT)
ASNT RP SNT-TC-1A
(2001) Recommended Practice
AMERICAN WELDING SOCIETY (AWS)
AWS A2.4
(1998) Standard Symbols for Welding,
Brazing and Nondestructive Examination
AWS A3.0
(2001) Standard Welding Terms and
Definitions
AWS B2.1
(2000) Welding Procedure and Performance
Qualification
AWS D1.1/D1.1M
(2004) Structural Welding Code - Steel
AWS QC1
(1996) AWS Certification of Welding
Inspectors
AWS Z49.1
(1999) Safety in Welding, Cutting and
Allied Processes
ASME INTERNATIONAL (ASME)
ASME B31.1
(2004) Power Piping
ASME B31.3
(2002) Process Piping
ASME B31.4
(2002) Piping Transportation Systems for
Liquid Hydrocarbons and Other Liquid
SECTION 15216N
Page 4
Previous Page
