PART 1
GENERAL
1.1
REFERENCES
**************************************************************************
NOTE: Issue (date) of references included in
project specifications need not be more current than
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
AMERICAN PETROLEUM INSTITUTE (API)
API Std 618
(1995) Reciprocating Compressors for
Petroleum, Chemical, and Gas Industry
Services
ASME INTERNATIONAL (ASME)
ASME B1.20.1
(1983; R 2001) Pipe Threads, General
Purpose, Inch
ASME B16.1
(1998) Cast Iron Pipe Flanges and Flanged
Fittings
ASME B16.5
(2003) Pipe Flanges and Flanged Fittings
ASME B16.9
(2003) Factory-Made Wrought Steel
Buttwelding Fittings
ASME B40.1
(1991) Gauges - Pressure Indicating Dial
Type - Elastic Element
ASME BPVC SEC VIII D1
(2001) Boiler and Pressure Vessel Code;
Section VIII, Pressure Vessels Division 1
- Basic Coverage
ASME PTC 9
(1970; R 1997) Displacement Compressors,
Vacuum Pumps and Blowers
ASTM INTERNATIONAL (ASTM)
ASTM A 123/A 123M
(2002) Zinc (Hot-Dip Galvanized) Coatings
on Iron and Steel Products
ASTM A 153/A 153M
(2004) Zinc Coating (Hot-Dip) on Iron and
Steel Hardware
ASTM A 307
(2004) Carbon Steel Bolts and Studs, 60
000 PSI Tensile Strength
ASTM A 36/A 36M
(2004) Carbon Structural Steel
SECTION 15214N
Page 5
Previous Page
