Selection and Application
MSS SP-89
(1998) Pipe Hangers and Supports -
Fabrication and Installation Practices
NATIONAL FIRE PROTECTION ASSOCIATION (NFPA)
NFPA 54
(2002) National Fuel Gas Code
NFPA 58
(2004) Liquefied Petroleum Gas Code
SHEET METAL AND AIR CONDITIONING CONTRACTORS' NATIONAL ASSOCIATION
(SMACNA)
SMACNA Seismic Restraint Mnl
(1998, 2nd Ed) Seismic Restraint Manual:
Guidelines for Mechanical Systems
U.S. DEPARTMENT OF DEFENSE (DOD)
MIL-STD-101
(Rev B) Color Code for Pipelines & for
Compressed Gas Cylinders
U.S. NATIONAL ARCHIVES AND RECORDS ADMINISTRATION (NARA)
49 CFR 192
Transportation of Natural and Other Gas by
Pipeline: Minimum Federal Safety Standards
49 CFR 195
Transportation of Hazardous Liquids by
Pipeline
1.2
DEFINITION
a.
Year 2000 compliant - means computer controlled facility
components that accurately process date and time data (including,
but not limited to, calculating, comparing, and sequencing) from,
into, and between the twentieth and twenty-first centuries, and
the years 1999 and 2000 and leap year calculations.
1.3
RELATED REQUIREMENTS
Section 15050N BASIC MECHANCIAL MATERIALS AND METHODS applies to this
section, with additions and modifications specified herein.
1.4
SUBMITTALS
**************************************************************************
NOTE: Submittals must be limited to those necessary
for adequate quality control. The importance of an
item in the project should be one of the primary
factors in determining if a submittal for the item
should be required.
A "G" following a submittal item indicates that the
submittal requires Government approval. Some
submittals are already marked with a "G". Only
delete an existing "G" if the submittal item is not
complex and can be reviewed through the Contractor's
Quality Control system. Only add a "G" if the
submittal is sufficiently important or complex in
SECTION 15195N
Page 6
Previous Page
