4.
5. Location and capacity of LP gas containers.
**************************************************************************
PART 1
GENERAL
1.1
REFERENCES
**************************************************************************
NOTE: Issue (date) of references included in
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)
ANSI B109.1
(2000) Diaphragm-Type Gas Displacement
Meters (Under 500 Cubic Feet per Hour
Capacity)
ANSI B109.2
(2000) Diaphragm Type Gas Displacement
Meters (500 Cubic Feet per Hour Capacity
and Over)
ANSI B109.3
ANSI B16.33
(1990) Manually Operated Metallic Gas
Valves for Use in Gas Piping Systems up to
125 psig (Sizes 1/2 Through 2)
ANSI B18.2.1
(1996; Errata 2003) Square and Hex Bolts
and Screws Inch Series
ANSI Z21.41
(1998; A 2002) Quick-Disconnect Devices
for Use with Gas Fuel Appliances
ANSI Z21.45
(1995) Flexible Connectors of Other Than
All-Metal Construction for Gas Appliances
ANSI Z21.69
(2002) Connectors for Movable Gas
Appliances
ANSI Z21.70
(1981) Earthquake Actuated Automatic Gas
Shutoff Systems
ASME INTERNATIONAL (ASME)
ASME B1.1
(2001; R 2003) Unified Inch Screw Threads
(UN and UNR Thread Form)
SECTION 15195N
Page 4