For submittals requiring Government approval on Army
projects, a code of up to three characters within
the submittal tags may be used following the "G"
designation to indicate the approving authority.
Codes for Army projects using the Resident
Management System (RMS) are: "AE" for
Architect-Engineer; "DO" for District Office
(Engineering Division or other organization in the
District Office); "AO" for Area Office; "RO" for
Resident Office; and "PO" for Project Office. Codes
following the "G" typically are not used for Navy
projects.
Submittal items not designated with a "G" are
considered as being for information only for Army
projects and for Contractor Quality Control approval
for Navy projects.
**************************************************************************
Government approval is required for submittals with a "G" designation;
submittals not having a "G" designation are [for Contractor Quality Control
approval.][for information only. When used, a designation following the
"G" designation identifies the office that will review the submittal for
the Government.] The following shall be submitted in accordance with
Section 01330 SUBMITTAL PROCEDURES:
[[_____] will review and] [_____] Division, Naval Facilities Engineering
Command will approve submittals requiring special review in this section.
SD-02 Shop Drawings
Monorail; G
SD-05 Design Data
Design calculations; G
SD-06 Test Reports
Hooks and hook nuts magnetic-particle tests; G
Load tests; G
SD-07 Certificates
Wire rope
Load chain
SD-10 Operation and Maintenance Data
Monorail system, Data Package 3; G
Submit in accordance with Section 01781 OPERATION AND
MAINTENANCE DATA.
SECTION 14535N
Page 4