Overhead or Underground Line Construction
ELECTRONIC INDUSTRIES ALLIANCE (EIA)
EIA ANSI/TIA/EIA-222-F
(1996) Structural Standards for Steel
Antenna Towers and Antenna Supporting
Structures
INSTITUTE OF ELECTRICAL AND ELECTRONICS ENGINEERS (IEEE)
IEEE C62.41
(1991; R 1995) Recommended Practice for
Surge Voltages in Low-Voltage AC Power
Circuits
NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION (NEMA)
NEMA ICS 1
(2000) Industrial Control and Systems:
General Requirements
NATIONAL FIRE PROTECTION ASSOCIATION (NFPA)
NFPA 70
(2005) National Electrical Code
NFPA 72
(2002) National Fire Alarm Code
NFPA 780
(2000) Installation of Lightning
Protection Systems
U.S. NATIONAL ARCHIVES AND RECORDS ADMINISTRATION (NARA)
47 CFR 15
Radio Frequency Devices
UNDERWRITERS LABORATORIES (UL)
UL 1242
(2000; Rev thru May 2003) Electrical
Intermediate Metal Conduit -- Steel
UL 467
(2004) Grounding and Bonding Equipment
UL 6
(2000; Rev thru May 2003) Rigid Metal
Conduit
UL 797
(2004) Electrical Metallic Tubing -- Steel
1.2
SUBMITTALS
**************************************************************************
NOTE: Submittals must be limited to those necessary
for adequate quality control. The importance of an
item in the project should be one of the primary
factors in determining if a submittal for the item
should be required.
A "G" following a submittal item indicates that the
submittal requires Government approval. Some
submittals are already marked with a "G". Only
delete an existing "G" if the submittal item is not
complex and can be reviewed through the Contractor's
Quality Control system. Only add a "G" if the
SECTION 13852A
Page 4
Previous Page
