NOTE: The following information shall be shown on
the project drawings:
1. The project drawings shall clearly show
location, extent, condition and form of asbestos
materials to be controlled or in contact with other
non-ACM removals or new work.
**************************************************************************
PART 1
GENERAL
1.1
REFERENCES
**************************************************************************
NOTE: Issue (date) of references included in
project specifications need not be more current than
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)
ANSI Z88.2
(1992) Respiratory Protection
ANSI Z9.2
(2001) Fundamentals Governing the Design
and Operation of Local Exhaust Ventilation
Systems
ASTM INTERNATIONAL (ASTM)
ASTM C 732
(2001) Aging Effects of Artificial
Weathering on Latex Sealants
ASTM D 1331
(1989; R 2001) Surface and Interfacial
Tension of Solutions of Surface-Active
Agents
ASTM D 2794
(1993; R 2004) Resistance of Organic
Coatings to the Effects of Rapid
Deformation (Impact)
ASTM D 522
(1993a; R 2001) Mandrel Bend Test of
Attached Organic Coatings
ASTM E 119
(2000a) Fire Tests of Building
Construction and Materials
ASTM E 1368
(2003) Visual Inspection of Asbestos
Abatement Projects
ASTM E 1494
(1992; R 2002) Encapsulants for Spray- or
Trowel-Applied Friable Asbestos-Containing
Building Materials
SECTION 13281N
Page 6
Previous Page
