1.1
REFERENCES
**************************************************************************
NOTE: Issue (date) of references included in
project specifications need not be more current than
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)
ANSI Z9.2
(2001) Fundamentals Governing the Design
and Operation of Local Exhaust Ventilation
Systems
ASTM INTERNATIONAL (ASTM)
ASTM E 1613
(2004) Determination of Lead by
Inductively Coupled Plasma Atomic Emission
Spectrometry (ICP-AES), Flame Atomic
Absorption Spectrometry (FAAS), or
Graphite Furnace Atomic Absorption
Spectometry (GFAAS) Techniques
ASTM E 1644
(2004) Hot Plate Digestion of Dust Wipe
Samples for the Determination of Lead
ASTM E 1726
(2001) Preparation of Soil Samples by
Hotplate Digestion for Subsequent Lead
Analysis
ASTM E 1727
(2004) Field Collection of Soil Samples
for Lead Determination by Atomic
Spectrometry Techniques
ASTM E 1728
(2003) Collection of Settled Dust Samples
Using Wipe Sampling Methods for Subsequent
Lead Determination
ASTM E 1792
(2003) Wipe Sampling Materials for Lead in
Surface Dust
NATIONAL FIRE PROTECTION ASSOCIATION (NFPA)
NFPA 701
(1999) Fire Tests for Flame Propagation of
Textiles and Films
U.S. DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT (HUD)
HUD 6780
(1995; Errata Aug 1996;Rev Ch. 7 - 1997)
Guidelines for the Evaluation and Control
of Lead-Based Paint Hazards in Housing
SECTION 13281A
Page 4
Previous Page
