2. Accessories as depth indicator, telemetering
automatic controls, protection against freezing, or
other special project requirements.
3. Requirements of Federal Aviation Agency to
determine if tank constitutes a hazard to aerial
navigation. If so, show pattern for orange and
white painting. Detail obstruction lights or beacon
and intermediate lights as required. Refer to
Federal Aviation Agency Aviation Circular AC
70/7460-1G, "Obstruction Marking and Lighting".
4. Requirements for cathodic protection system,
including details of anodes, anode layout, wiring
connections, and rectifier (as applicable).
**************************************************************************
1.1
REFERENCES
**************************************************************************
NOTE: Issue (date) of references included in
project specifications need not be more current than
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
AMERICAN SOCIETY OF CIVIL ENGINEERS (ASCE)
ASCE 7
(2002) Minimum Design Loads for Buildings
and Other Structures
AMERICAN WATER WORKS ASSOCIATION(AWWA)
AWWA B300
(1999) Hypochlorites
AWWA B301
(2004) Liquid Chlorine
AWWA C104
(1995) Cement-Mortar Lining for
Ductile-Iron Pipe and Fittings for Water
AWWA C105
(1999) Polyethylene Encasement for
Ductile-Iron Pipe Systems
AWWA C110
(1998) Ductile-Iron and Gray-Iron
Fittings, 3 In. Through 48 In. (76 mm
through 1219 mm), for Water
AWWA C111
(2000) Rubber-Gasket Joints for
Ductile-Iron Pressure Pipe and Fittings
AWWA C115
(1999) Flanged Ductile-Iron Pipe With
Ductile-Iron or Gray-Iron Threaded Flanges
SECTION 13209
Page 4
Previous Page
