**************************************************************************
USACE / NAVFAC / AFCESA
UFGS-13209 (July 2003)
----------------------------
Preparing Activity: USACE
Superseding
UFGS-13210A (February 2002)
UFGS-13209N (September 2000)
UFGS-13206A (February 2002)
UNIFIED FACILITIES GUIDE SPECIFICATIONS
References are in agreement with UMRL dated 23 June 2005
**************************************************************************
SECTION 13209
WATER STORAGE STEEL TANKS
07/03
**************************************************************************
NOTE: This guide specification covers the
requirements for steel standpipes, ground storage
tanks (reservoirs), and elevated water tanks 380 to
1890 kL (100,000 to 500,000 gallon) capacity.
Comments and suggestions on this guide specification
are welcome and should be directed to the technical
proponent of the specification. A listing of
technical proponents, including their organization
designation and telephone number, is on the Internet.
Recommended changes to a UFGS should be submitted as
a Criteria Change Request (CCR).
Use of electronic communication is encouraged.
Brackets are used in the text to indicate designer
choices or locations where text must be supplied by
the designer.
**************************************************************************
PART 1
GENERAL
**************************************************************************
NOTE: This Section covers welded and bolted steel
water storage tanks and includes the design,
fabrication, and erection of a complete system to
augment an existing or future water distribution
system and the inspection and repair of existing
water storage tanks. This specification must be
edited to specify the required type of tank.
The following information will be shown on the
1. Detail plans to show tank location, elevation,
valve vault if required, and connection to system.
SECTION 13209
Page 3