AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)
ANSI C135.30
(1988) Zinc-Coated Ferrous Ground Rods for
Overhead or Underground Line Construction
ASTM INTERNATIONAL (ASTM)
ASTM D 1248
(2004) Polyethylene Plastics Extrusion
Materials for Wire and Cable
INSTITUTE OF ELECTRICAL AND ELECTRONICS ENGINEERS (IEEE)
IEEE Std 81
(1983) Guide for Measuring Earth
Resistivity, Ground Impedance, and Earth
Surface Potentials of a Ground System
(Part 1)Normal Measurements
NACE INTERNATIONAL (NACE)
NACE RP0388
(2001) Impressed Current Cathodic
Protection of Internal Submerged Surfaces
of Carbon Steel Water Tanks
NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION (NEMA)
NEMA FU 1
(2002) Low Voltage Cartridge Fuses
NEMA TC 2
(2003) Electrical Polyvinyl Chloride (PVC)
Tubing and Conduit
NATIONAL FIRE PROTECTION ASSOCIATION (NFPA)
NFPA 70
(2005) National Electrical Code
UNDERWRITERS LABORATORIES (UL)
UL 467
(2004) Grounding and Bonding Equipment
UL 506
(2000; Rev thru Feb 2004) Specialty
UL 510
(2005) Polyvinyl Chloride, Polyethylene,
and Rubber Insulating Tape
UL 514A
(2004) Metallic Outlet Boxes
UL 6
(2000; Rev thru May 2003) Rigid Metal
Conduit
1.2
SUBMITTALS
**************************************************************************
NOTE: Submittals must be limited to those necessary
for adequate quality control. The importance of an
item in the project should be one of the primary
factors in determining if a submittal for the item
should be required.
A "G" following a submittal item indicates that the
SECTION 13111A
Page 4
Previous Page
