the U.S. Air Force Handbook for the Design and
Construction of HEMP/TEMPEST and Other Shields in
Facilities for more details. Methodology and
procedures for setting up equipment are contained in
MIL-HDBK-423. Full MIL-STD-188-125 acceptance
testing (PCI tests as specified in appendix B)
should be avoided. (Also see designer notes K and
U). Although not addressed in this specification,
fiber optic cable has gained acceptance as an
effective method of transmitting data across the
boundary of shielded enclosures without filtering.
If fiber optic cable is used, describe the waveguide
penetration of the shield in detail. Fiber optic
cable is specified in UFGS-16768A, FIBER OPTIC DATA
TRANSMISSION SYSTEM.
**************************************************************************
1.1
REFERENCES
**************************************************************************
NOTE: Issue (date) of references included in
project specifications need not be more current than
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
AMERICAN HARDBOARD ASSOCIATION (AHA)
AHA A135.4
(1995) Basic Hardboard
AMERICAN INSTITUTE OF STEEL CONSTRUCTION (AISC)
AISC 316
(1989) ASD Manual of Steel Construction
AMERICAN WELDING SOCIETY (AWS)
AWS A5.18/A5.18M
(2001) Carbon Steel Filler Metals for Gas
Shielded Arc Welding
AWS BRH
(2002) Brazing Handbook
AWS D1.1/D1.1M
(2004) Structural Welding Code - Steel
AWS D1.3
(1998) Structural Welding Code - Sheet
Steel
AWS D9.1M/D9.1
(2000) Sheet Metal Welding Code
ASTM INTERNATIONAL (ASTM)
ASTM A 123/A 123M
(2002) Zinc (Hot-Dip Galvanized) Coatings
on Iron and Steel Products
SECTION 13095A
Page 7
Previous Page
