3. Sections showing supporting steel for ceiling
panels if required for the project.
4.
Details of shelves.
5.
Details and location of light fixtures.
6.
Location of refrigeration equipment.
7. Storage temperature, cooler capacity, evaporator
air flow rate, and evaporator temperature.
8. Electrical characteristics for lights,
condensing units, and evaporators.
**************************************************************************
PART 1
GENERAL
1.1
REFERENCES
**************************************************************************
NOTE: Issue (date) of references included in
project specifications need not be more current than
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
AIR-CONDITIONING AND REFRIGERATION INSTITUTE (ARI)
ARI 365
(2002) Commercial and Industrial Unitary
Air-Conditioning Condensing Units
ARI 420
(2000) Unit Coolers for Refrigeration
NSF INTERNATIONAL (NSF)
NSF 7
(2001) Commercial Refrigerators and
Freezers
U.S. DEPARTMENT OF DEFENSE (DOD)
MIL-R-43900
(Rev B; Notice 2) Refrigerators, Freezers,
Prefabricated, Mechanical, Commercial,
Walk-In
U.S. GENERAL SERVICES ADMINISTRATION (GSA)
FS A-A-52128
(Basic) Shelving, Storage, Stationary and
Mobile, Food Storage
SECTION 13038
Page 3
Previous Page
