SECTION 13038 COLD-STORAGE ROOMS (PREFABRICATED PANEL TYPE)

**************************************************************************

USACE / NAVFAC / AFCESA

UFGS-13038 (August 2001)

------------------------------

Preparing Activity: NAVFAC

Superseding

UFGS-13038 (September 1999)

UNIFIED FACILITIES GUIDE SPECIFICATIONS

References are in agreement with UMRL dated 23 June 2005

Latest change indicated by CHG tags

**************************************************************************

SECTION 13038

COLD-STORAGE ROOMS (PREFABRICATED PANEL TYPE)

08/01

**************************************************************************

NOTE: This guide specification covers the

requirements for requirements for walk-in

refrigerators and freezers.

Comments and suggestions on this guide specification

are welcome and should be directed to the technical

proponent of the specification. A listing of

technical proponents, including their organization

designation and telephone number, is on the Internet.

Recommended changes to a UFGS should be submitted as

a Criteria Change Request (CCR).

Use of electronic communication is encouraged.

Brackets are used in the text to indicate designer

choices or locations where text must be supplied by

the designer.

**************************************************************************

NOTE: Lighting and refrigeration equipment are

included in this guide specification.

**************************************************************************

NOTE: Indicate the following information on the

project drawings for each cold storage room:

1. Configuration and dimensions (width, length, and

height).

2. Sections showing floor construction, including

details through door openings. Design floors for

food service facilities with prefabricated floor

sections in depressed pad with quarry tile finish.

Experience has shown that this type of floor

construction should be used in walk-in refrigerated

rooms.

SECTION 13038

Page 2