glued and screwed to form an integral unit. Bond laminated plastic under
pressure to exposed surfaces, using type of glue recommended by plastic
manufacturer [, and bond a backing sheet under pressure to underside of
countertop]. Countertop unit shall be post-formed type with no-drip nose,
cove moulding, and Style A back splash, and covered with NEMA LD 3, Grade
PF 42 plastic. Back splash shall be not less than 88 mm 3 1/2 inches nor
more than 113 mm 4 1/2 inches high.
2.4
FINISHES
2.4.1
Cabinet Finish
Provide factory applied [stained wood] [clear coated natural finish] [or]
[HPDL] finish [as indicated] on all internal and external surfaces except
underside of drawer bottoms.
2.4.1.1
Stained Wood Finish
**************************************************************************
NOTE: Manufacturers use a variety of wood species
in the production of kitchen cabinets. To specify a
single species would be cost prohibitive and/or
restrict competition. When indicating finishes,
such as "light oak," "medium walnut," etc., a wood
species should be included in the finish designation
for use as a guide to the wood grain character and
appearance.
**************************************************************************
[As selected from manufacturer's standard finishes] [As indicated].
Internal surfaces shall receive at least one coat of finish material.
2.4.1.2
HPDL Finish
Pattern and color; [as selected from manufacturer's standard finishes] [as
indicated]. Cover internal surfaces with cabinet liner HPDL.
2.4.2
Countertop Finish
Pattern and color; [as selected from manufacturer's standard finishes] [as
indicated].
[2.5
METAL CABINETS
2.5.1
Steel
Prime cold rolled steel, not lighter than 0.9 mm thick 20 gage for doors,
0.8 mm thick 22 gage for cabinet bodies and shelves. Provide wall cabinet
corner mullions of full wrap construction with three 90 degree bends.
Provide base cabinets with fixed top rails and integral sub-base with 64 by
100 mm 2 1/2 by 4 inch toe space. Make all exposed welds flush and grind
smooth.
2.5.2
Welded Cabinets
Conform to KCMA A161.1, all welded construction.
SECTION 12352N
Page 9
Previous Page
