Cabinet finishes; G
Where colors are not indicated, submit not less than eight
different samples of manufacturer's standard colors for selection
[by the Contracting Officer].]
Cabinets
Submit one assembled first article for inspection and approval
by Contracting Officer at installation site.
1.3
DELIVERY AND STORAGE
Deliver materials in manufacturer's original unopened containers or
packaging with labels intact and legible. Deliver, store, and handle
materials so as to prevent damage. Replace defective or damaged materials
with new.
PART 2
PRODUCTS
2.1
CABINETS
The work includes providing new factory-finished kitchen wall and base
cabinets with high pressure decorative laminate (HPDL) countertops [and
bathroom vanity cabinets [with HPDL countertops] [to receive combination
lavatory-countertops as specified in Section 15400 PLUMBING SYSTEMS]]. The
cabinets shall conform to KCMA A161.1, requirements specified herein, and
bear the "KCMA Certified Cabinet" seal of the Kitchen Cabinet Manufacturers
Association. In lieu of this, manufacturer shall submit test reports from
an approval laboratory that cabinets meet requirements of KCMA A161.1.
Countertops shall conform to NEMA LD 3.1 and requirements specified herein.
2.2
MATERIALS
Conform to reference documents listed and specified requirements.
2.2.1
High-Pressure Decorative Laminate (HPDL)
NEMA LD 3, satin finish, unless otherwise indicated.
2.2.1.1
Countertops
PF 42, satin finish.
2.2.1.2
Vertical Surfaces
GP 28 or PF 30, satin finish.
2.2.1.3
Backing Sheet
BK 20.
2.2.1.4
Cabinet Liner
CL 20.
SECTION 12352N
Page 6
Previous Page
