date, time of each reading and each sampling event, fuel use, and total
off-gas treated.
3.6
MANUFACTURER'S FIELD SERVICE
3.6.1
Representative's Services
Services of a manufacturer's representative who is experienced in the
installation, adjustment, and operation of the equipment specified shall be
provided. The representative shall supervise the installation, adjustment,
calibration, commissioning, start-up and operational/performance testing of
the equipment.
3.6.2
Field Training
**************************************************************************
NOTE: Complexity of the system and experience of
the user operators should be taken into
consideration.
**************************************************************************
A field-training course shall be provided for designated operating and
maintenance personnel. Training shall be provided for a total period of
[_____] hours of normal working time and shall start after the system is
functionally complete but prior to the [performance] [operational] test.
Field training shall cover each item contained in the operating and
maintenance manuals, as well as demonstrations of routine maintenance
operations.
3.7
POSTING FRAMED INSTRUCTIONS
**************************************************************************
NOTE: If the user preference is known, show the
location on the drawings and edit this paragraph.
**************************************************************************
Wiring and control diagrams and typed condensed operating instructions
framed under glass or in laminated plastic shall be posted where directed.
Diagrams shall show the complete layout, wiring and control of the entire
system. Condensed operating instructions shall explain preventive
maintenance procedures, methods of checking the system for normal safe
operation and procedures for safely starting and stopping the system. The
diagrams and instructions shall be posted before acceptance testing of the
system.
3.8
MAINTENANCE
**************************************************************************
NOTE: Select the option that is compatible with the
Bid Schedule.
**************************************************************************
The Contractor shall manage, operate, maintain, and monitor the off-gas
control system [until contract close out] [for at least [one year] [_____]
after construction, startup and performance testing are complete]. At a
minimum, an operator shall be on site [eight] [_____] hours per week to
operate, maintain, and calibrate the equipment and instruments, and to
collect samples for analyses. A qualified person shall be on call to
respond to emergencies and alarm conditions at the off-gas system within
SECTION 11378
Page 33
Previous Page
