[Welding procedures shall be as specified in AWS D1.1/D1.1M] [Welding and
nondestructive testing procedures for piping shall be as specified in
Section 05093 WELDING PRESSURE PIPING] [Structural members shall be welded
in accordance with Section 05090A WELDING, STRUCTURAL].
3.3.2
Painting/Corrosion Prevention
All ferrous surfaces shall be coated or painted. Exposed ferrous surfaces
shall be painted in accordance with Section 09900 PAINTS AND COATINGS.
Color shall be as indicated on the paint schedule or as otherwise approved.
3.3.2.1
Factory Primed Surfaces
Factory primed surfaces shall be solvent-cleaned before painting.
3.3.2.2
Touch-Up Painting
Factory painted items shall be touched up as needed. Factory painted items
requiring touching up in the field shall be thoroughly cleaned of foreign
material, primed and top coated with the factory finish.
3.3.2.3
Field Painting
Equipment which did not receive a factory finish shall be prepared, primed
and painted, as specified in Section 09900 PAINTS AND COATINGS.
3.3.2.4
Corrosion Resistant Metals
Painting of corrosion resistant materials such as copper, brass, bronze,
copper-nickel, and stainless steel is not required unless otherwise
specified.
3.4
INSTALLATION
3.4.1
Insulation
Equipment and piping shall be insulated in accordance with Section 15080A
THERMAL INSULATION FOR MECHANICAL SYSTEMS.
3.4.2
Utilities
**************************************************************************
NOTE: Points of connection are normally shown on
the drawings. Occasionally, the name, address and
telephone number of each utility company is shown on
the drawings. Delete the following paragraphs if
the information is shown elsewhere.
**************************************************************************
Fuel and utilities shall be provided at locations shown on the drawings.
The Contractor shall verify availability and locations of utilities and
shall compensate the utility company for connection and usage. Fuel,
water, sewer, power and any other utility bills shall be paid on receipt.
3.4.2.1
The power [utility] [company] is [_____], telephone number [_____].
SECTION 11378
Page 30
Previous Page
