[Six] [_____] copies of operation explaining in detail
step-by-step procedures required for system startup, operation,
and shutdown. The instructions shall include parts list, and a
brief description of all equipment and operating features.
[six] [_____] copies of maintenance manuals explaining in detail
routine maintenance procedure including inspection, adjustments,
lubrication, and cleaning. The instructions shall list possible
breakdown, methods of repair, and a troubleshooting guide. The
instructions shall include piping layout, equipment layout, and
simplified wiring and control diagrams of the system as
installed.for the equipment furnished. One complete set prior to
performance testing and the remainder upon acceptance. The
manuals shall be identified by title, equipment and manufacturer.
Manuals shall be submitted and approved prior to the field
training course.
1.3
FIELD MEASUREMENTS
The Contractor shall become familiar with all details of the work, verify
all dimensions in the field, and shall advise the Contracting Officer of
any discrepancy before performing the work.
1.4
MANUFACTURER'S SERVICES
The Contractor shall obtain the services of the manufacturer's
representative experienced in the installation, adjustment, and operation
of the equipment specified. The representative shall supervise the
installing, adjusting, and testing of the equipment.
1.5
DELIVERY AND STORAGE
All equipment delivered and placed in storage shall be protected from
weather, humidity and temperature variations, dirt and dust, or other
PART 2
PRODUCTS
2.1
STANDARD PRODUCTS
Materials and equipment shall conform to the respective publications and
other requirements specified and shall be the standard products of a
manufacturer regularly engaged in the manufacture of the products. Items
of equipment shall essentially duplicate equipment that has been in
satisfactory use at least 2 years prior to bid opening. Equipment shall be
supported by a service organization that is, in the opinion of the
Contracting Officer, reasonably convenient to the site.
2.2
NAMEPLATES
Major equipment items shall have manufacturer's name, address, type or
style, catalog number and model or serial number on a plate securely
attached to item of equipment. In lieu of nameplate on the comminutor,
manufacturer's name or trademark may be cast integrally with comminutor,
stamped, or otherwise permanently marked.
SECTION 11331
Page 6
Previous Page
