a 5 year period from the date of acceptance of the work. Provide new units
for units failing to comply with terms of this warranty no later than 45
working days following receipt of notice from the Government.
PART 2
PRODUCTS
2.1
DETENTION GLAZING ASSEMBLIES
2.1.1
Glass-Clad Polycarbonate
Two glass outer layers (plies), bonded to a core of one or more plastic
layers (plies).
2.1.2
Plastic Laminated (Bonded) Construction
Two or more layers (plies) of plastic sheet bonded together with
polyurethane.
2.1.3
Glass Laminated (Bonded) Construction
Two or more layers (plies) of chemically-strengthened float glass bonded
together with polyvinyl butyral (PVB).
2.2
DETENTION GLAZING MATERIALS
2.2.1
Glass, Chemically Strengthened
ASTM C 158, transparent prestressed.
2.2.2
Glass, Annealed, Wire
ASTM C 1036, Type II, Class 1, form 1, Quality q8, 6 mm 1/4 inch thick,
with diamond or square mesh.
2.2.3
Polycarbonate, Transparent, Rigid Sheet Plastic
**************************************************************************
NOTE: The type, class, and thickness of
polycarbonate glazing material to be used in
detention glazing assemblies is specified in
paragraph entitled "Detention Glazing Types" by
Type. Note that mar-resistant coating is to be
provided in Glazing Types 3, 5, and 5W only.
**************************************************************************
MIL-P-46144, [Type I Grade A] [Type III Grade A] [clear] [transparent],
thickness as specified.
2.3
DETENTION GLAZING TYPES
**************************************************************************
NOTE: Glazing types should be indicated on project
drawings.
**************************************************************************
a.
Type 1:
Tempered Glass; Conform to Section 08800 GLAZING.
b.
Type 2: 11 mm 7/16 inch nominal glass-clad polycarbonate: 3 mm
1/8 inch clear chemically-strengthened glass, 1.3 mm 0.050 inch
SECTION 11192
Page 6
Previous Page
