PART 1
GENERAL
1.1
REFERENCES
**************************************************************************
NOTE: Issue (date) of references included in
project specifications need not be more current than
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)
ANSI B18.6.3
(1972; R 1997) Machine Screws and Machine
Screw Nuts
ANSI B18.6.4
(1981) Thread Forming and Threaded Cutting
Tapping Screws and Metallic Drive Screws
(Inch Series)
ASTM INTERNATIONAL (ASTM)
ASTM A 123
(1989a) Zinc (Hot Dip Galvanized) Coatings
on Iron and Steel Products
ASTM A 153/A 153M
(2004) Zinc Coating (Hot-Dip) on Iron and
Steel Hardware
ASTM A 167
(2004) Stainless and Heat-Resisting
Chromium-Nickel Steel Plate, Sheet, and
Strip
ASTM A 239
(2004) Locating the Thinnest Spot in a
Zinc (Galvanized) Coating on Iron or Steel
Articles
ASTM A 569/A 569M
(1998) Steel, Carbon (0.15 Maximum
Percent), Hot-Rolled Sheet and Strip,
Commercial
ASTM A 627
(2003) Tool-Resisting Steel Bars, Flats,
and Shapes for Detention and Correctional
Facilities
ASTM A 629
(1988; R 1994e1) Tool-Resisting Steel Flat
Bars and Shapes for Security Applications
ASTM A 653/A 653M
(2004a) Steel Sheet, Zinc-Coated
(Galvanized) or Zinc-Iron Alloy-Coated
(Galvannealed) by the Hot-Dip Process
ASTM A 90/A 90M
(2001) Weight (Mass) of Coating on Iron
and Steel Articles with Zinc or Zinc-Alloy
SECTION 11191
Page 4
Previous Page
