SECTION 11191 DETENTION AND SECURITY WINDOWS

**************************************************************************

USACE / NAVFAC / AFCESA

UFGS-11191 (September 1999)

------------------------------

Preparing Activity: NAVFAC

Replacing without revision

NFGS of same number and date

UNIFIED FACILITIES GUIDE SPECIFICATIONS

References are in agreement with UMRL dated 23 June 2005

**************************************************************************

SECTION 11191

DETENTION AND SECURITY WINDOWS

09/99

**************************************************************************

NOTE: This guide specification covers the

requirements for detention steel cell windows.

Comments and suggestions on this guide specification

are welcome and should be directed to the technical

proponent of the specification. A listing of

technical proponents, including their organization

designation and telephone number, is on the Internet.

Recommended changes to a UFGS should be submitted as

a Criteria Change Request (CCR).

Use of electronic communication is encouraged.

Brackets are used in the text to indicate designer

choices or locations where text must be supplied by

the designer.

**************************************************************************

NOTE: The following information shall be shown on

the project drawings:

1.

Jamb, head and sill sections.

2.

Method of anchoring and spacing; type of anchor.

3.

Window elevations and dimensions.

4.

Type of glazing.

5.

Elevations above finished floor.

6. Details of non-structural mullions and mullion

covers.

**************************************************************************

SECTION 11191

Page 3