2.4.6
Hardware
**************************************************************************
NOTE: The hardware options listed below apply only
to those bullet resistant door assemblies for which
extra-heavy-duty standard commercial hardware is
suitable. This includes the following types of
doors:
(1) Single and pairs of swinging personnel doors,
up to 1.2 m (4 feet - 0 inches) by 2.44 m (8 feet -
0 inches) per leaf.
(2) Bullet-resistant threat levels up to maximum
listed in paragraph COMPONENT TEST REQUIREMENTS.
(3) Bullet-resistant only or combined bullet and
fire resistive, manual or powered opening.
For the following assemblies, custom or specially
designed hardware should be specified (with
manufacturer's guidance):
(1) Oversized single and pairs of swinging doors,
such as those for vehicle entry.
(2)
Sliding doors of all types.
(3)
Folding doors of all types.
(4)
Upward moving doors of all types.
(5) Bullet-resistant threat levels above the
maximum listed in paragraph COMPONENT TEST
REQUIREMENTS.
(6) Bullet-resistant doors of any type with
additional forced entry blast, missile or pressure
resistive requirements.
For sound rated doors rated for STC 52 or more with
cypher lock requirements, designers should specify
electronic cypher locks rather than mechanical locks.
Where balanced magnetic switches (BMS) are required
on door/frames, specify shop drilled hardware
preparation and installation of magnets.
**************************************************************************
Hardware for bullet-resistant door assembly shall be provided by the door
assembly manufacturer to ensure a complete bullet resistant assembly.
Where test standard requires hardware to be tested with the door assembly,
hardware shall be included in the labeling and/or test certification.
Keying shall be as specified in Section 08710 DOOR HARDWARE.
2.4.6.1
Mortise Locks and Latchsets
Mortise lock and latchsets shall be series 1000, operational Grade 1,
Security Grade 1 or 1A, functions as indicated in the Hardware Schedule,
SECTION 11035
Page 20
Previous Page
