AP - Armor Piercing
LRN - Lead Round Nose Bullet
FMJ - Full Metal Jacketed
MPSA - Medium Power Small Arms
HPR - High Power Rifle
HPSA - High Power Small Arms
SPSA - Super Power Small Arms
JSP - Jacketed Soft Point
US - United States
LRHV - Long Rifle High Velocity
BALLISTIC TESTING STANDARDS:
ASTM - American Society for Testing and Materials;
ASTM F 1233, "Security Glazing Materials and
Systems," 1989.
HPW - H.P. White Laboratory, Inc.; HPW-TP-0501.01,
"Ballistic Resistance of Structural Materials
(Opaque and Transparent); Test Procedures and
Acceptance Criteria," 1989.
NFESC-SAMIT - Naval Facilities Engineering Service
Center (NFESC), Department of the Navy; NFESC-CR
80.025 "Testing and Evaluation of Attack Resistance
and Hardening Retrofits of Marine Barrack
Construction Types to Small Arms Multiple Impact
Threat (SAMIT) 1980.
NIJ - National Institute of Justice; NIJ Standard
0108.01, "Ballistic Resistant Protective Materials,"
1985.
SD - Department of State; SD Std-01.01 Rev F,
"Certification Standard Forced Entry and Ballistic
Resistance of Structural Systems Test Procedures,"
1992.
UL - American National Standards
Institute/Underwriters Laboratories, Inc.; ANSI/UL
752, "Standard for Bullet-Resisting Equipment," 1995.
**************************************************************************
Bullet-resistant components shall be provided at locations shown on the
drawings. Bullet-resistant components [where indicated] [_____] shall be
in accordance with [[NIJ Type I] [NIJ Type IIA] [NIJ Type II] [NIJ Type
IIIA] of NIJ Std 0108.01.] [[UL MPSA] [UL HPSA] [UL SPSA] [UL HPR] of UL 752.]
[[ASTM Submachine Gun] [ASTM Handgun (.44 Magnum)] [ASTM Handgun (.38
Super)] [ASTM Rifle (.44 Magnum)] [ASTM Rifle (AP)] of ASTM F 1233.] [[HPW
Minimum Standard] [HPW Rifle Standard] [HPW Rifle AP Standard] of HPW
TP-0501.01.] [[SD Submachine Gun (S)] [SD Military Rifle (R)] [SD Rifle
(AP)] of SD Std-01.01.] [the test requirement of [NFESC SAMIT] [NFESC SAMIT
(AP)] of NFESC CR 80.025.]
1.6
DELIVERY, STORAGE, AND HANDLING
Components shall be delivered to the job site with the brand, name, and
model number clearly marked thereon. All components shall be delivered,
stored and handled so as not to be damaged or deformed, and in accordance
SECTION 11035
Page 17
Previous Page
