frequencies through independent laboratory test results. Carpet type
bearing the label will indicate that the carpet has been tested and meets
the criteria of the CRI IAQ Carpet Testing Program, and minimizes the
impact on indoor air quality. Contractor shall procure carpet in
accordance with 40 CFR 247. Carpet shall conform to EPA requirements in
accordance with Section 01670 RECYCLED / RECOVERED MATERIALS. Where
possible, product shall be purchased locally to reduce emissions of fossil
fuels from transporting.
1.4
DELIVERY AND STORAGE
Materials shall be delivered to the site in the manufacturer's original
wrappings and packages clearly labeled with the manufacturer's name, brand
name, size, dye lot number, and related information. Materials shall be
stored in a clean, dry, well ventilated area, protected from damage and
soiling, and shall be maintained at a temperature above 16 degrees C 60
degrees F for 2 days prior to installation.
1.5
ENVIRONMENTAL REQUIREMENTS
Areas in which carpeting is to be installed shall be maintained at a
temperature above 16 degrees C 60 degrees F for 2 days before installation,
during installation, and for 2 days after installation. A minimum
temperature of 13 degrees C 55 degrees F shall be maintained thereafter for
the duration of the contract. Traffic or movement of furniture or
equipment in carpeted area shall not be permitted for 24 hours after
installation. Other work which would damage the carpet shall be completed
prior to installation of carpet.
1.6
WARRANTY
Manufacturer's standard performance guarantees or warranties including
minimum ten (10) year wear warranty, two (2) year material and workmanship
and ten (10) year tuft bind and delamination.
1.7
EXTRA MATERIAL
Extra material from same dye lot consisting of [full width continuous
broadloom] [and] [uncut carpet tiles] shall be provided for future
maintenance. A minimum of [_____] percent of total square meters square
yards of each carpet type, pattern, and color shall be provided.
PART 2
PRODUCTS
2.1
CARPET
**************************************************************************
NOTE: Color, texture, and pattern must be in
accordance with Section 09915 COLOR SCHEDULE or must
be indicated on the drawings.
If more than one carpet type is required for a
project, a separate paragraph will be used for each
carpet type. Each carpet type will be designated
with a letter or number symbol. Use the same
designations to key carpets to locations on the
drawings and in Section 09915 COLOR SCHEDULE.
ADA Requirements:
If carpet is used as a floor,
SECTION 09680
Page 8
Previous Page
