substrate, seaming techniques, and recommended adhesives and tapes.
Regulatory Requirements[; G][; G, [_____]]
[Three] [_____] copies of report stating that carpet contains
recycled materials and/or involvement in a recycling or reuse
program. Report shall include percentage of recycled material.
SD-04 Samples
Carpet[; G][; G, [_____]]
Molding[; G][; G, [_____]]
a. Carpet: [Two] [_____] "Production Quality" samples 450 x
450 mm 18 x 18 inches of each carpet proposed for use, showing
quality, pattern, and color specified.
b. Vinyl or Aluminum Moldings: [Two] [_____] pieces of each
type at least 300 mm 12 inches long.
c. Special Treatment Materials:
[Two] [_____] samples showing
system and installation method.
SD-06 Test Reports
Moisture and Alkalinity Tests[; G][; G, [_____]]
[Three] [_____] copies of test reports of moisture and
alkalinity content of concrete slab stating date of test, person
conducting the test, and the area tested.
SD-07 Certificates
Carpet
Certificates of compliance from a laboratory accredited by the
National Laboratory Accreditation Program of the National
Institute of Standards and Technology attesting that each type of
carpet and carpet with cushion material conforms to the standards
specified.
Regulatory Requirements[; G][; G, [_____]]
Report stating that the carpet contains recycled materials and
indicating the actual percentage of recycled material.
SD-10 Operation and Maintenance Data
Carpet[; G][; G, [_____]]
Cleaning and Protection[; G][; G, [_____]]
[Three] [_____] copies of carpet manufacturer's maintenance
instructions describing recommended type of cleaning equipment and
material, spotting and cleaning methods, and cleaning cycles.
1.3
REGULATORY REQUIREMENTS
Carpet and adhesives shall bear the Carpet and Rug Institute (CRI) Indoor
Air Quality (IAQ) label or demonstrate compliance with testing criteria and
SECTION 09680
Page 7
Previous Page
