for adequate quality control. The importance of an
item in the project should be one of the primary
factors in determining if a submittal for the item
should be required.
A "G" following a submittal item indicates that the
submittal requires Government approval. Some
submittals are already marked with a "G". Only
delete an existing "G" if the submittal item is not
complex and can be reviewed through the Contractor's
Quality Control system. Only add a "G" if the
submittal is sufficiently important or complex in
context of the project.
For submittals requiring Government approval on Army
projects, a code of up to three characters within
the submittal tags may be used following the "G"
designation to indicate the approving authority.
Codes for Army projects using the Resident
Management System (RMS) are: "AE" for
Architect-Engineer; "DO" for District Office
(Engineering Division or other organization in the
District Office); "AO" for Area Office; "RO" for
Resident Office; and "PO" for Project Office. Codes
following the "G" typically are not used for Navy
projects.
Submittal items not designated with a "G" are
considered as being for information only for Army
projects and for Contractor Quality Control approval
for Navy projects.
**************************************************************************
Government approval is required for submittals with a "G" designation;
submittals not having a "G" designation are [for Contractor Quality Control
approval.][for information only. When used, a designation following the
"G" designation identifies the office that will review the submittal for
the Government.] The following shall be submitted in accordance with
Section 01330 SUBMITTAL PROCEDURES:
SD-02 Shop Drawings
Glazed curtain wall system
Submit for curtain wall system, accessories, and mock-up.
[Tentative approval of drawings shall be received before
fabrication of mock-up. Final approval of drawings will be
deferred pending approval of mock-up and accessories.] Drawings
shall indicate in detail all system parts including elevations,
full-size sections, framing, jointing, panels, types and thickness
of metal, flashing and coping details, field connections, weep and
drainage system, finishes, sealing methods, glazing, glass sizes
and details, firestopping insulation materials, and erection
details.
SD-03 Product Data
Glazed curtain wall system
SECTION 08900
Page 9
Previous Page
